Been a while… too long…  For various reasons there was a pause in boat-building, but hopefully now we’re back.

Was a short weekend but got the cockpit panels (wet and dry) laminated and taped in place.  Decided on putting the safety compartment on the port side.

[singlepic id=33 w=320 h=240 mode=watermark float=]

[singlepic id=34 w=320 h=240 mode=watermark float=]

[singlepic id=35 w=320 h=240 mode=watermark float=]

[singlepic id=36 w=320 h=240 mode=watermark float=]

[singlepic id=37 w=320 h=240 mode=watermark float=]

[singlepic id=38 w=320 h=240 mode=watermark float=]

[singlepic id=39 w=320 h=240 mode=watermark float=]

Next steps will be to fair and prime/paint the inside of the cockpit areas while we have access, then make the seat tops and put in place.

The forward beam bulkhead is prepped and ready for the massive perimeter lamination on the inside, so that should be a fun mess.