Alright – It’s been too long.  I apologize for the delay.  Between work, travel (for work), work and more work, what boat-related stuff we did took a back burner to documenting it.  Buy the time I had a moment to sit down, there were so many pictures I felt overwhelmed to update.

This post covers everything from the last update until 31-December 2008.  Some pictures were taken with my cell phone, some of them might be a little out of order but hopefully they make sense… Basically, you get what you paid for… 🙂

The hull halves were positioned over each other so the slots could be cut for the daggerboard case to fit in the port half

2675

2678

2681

Then we bogged the foam seams/screw holes at the keel to start with the extra laminates called for in that area

2696

Here are some more pictures of the joined hull

Aft cabin deck

2684

Aft cabin deck looking forward

2753

Aft end of keel

2702

Deck and daggerboard case opening

2699

Cockpit looking forward

2662

Forward keel

2672

Deck looking at aft cabin hatch area (hole for ventilation)

2780

Some extra laminate areas marked on keel

2768

Aft beam bulkheads joined to keep shape

2747

Aft cabin deck

2711

Cockpit looking forward

2750

Anchor well foam routed out for bog

2723

Anchor well cut-out bogged and HD with extra laminate for bow cleat

2798

Extra laminate across deck

2795

Deck stringer and daggerboard case lamination

2774

2729

2732

2735

Marking location for jib tracks to add HD foam

2777

Rough-cutting foil shape in daggerboard case keel end

2705

Thickness of laminate at bottom of daggerboard case

2708

Flange for second half of aft cabin bunk

2792

Pad plus extra laminate for rudder web

2756

Slot cut for rudder web in stern deck

2771

Constructing anchor well

2666

2669

Completed anchor well

2744

High-build primer on anchor well

2801

2804

I’ve misplaced pictures of making the basic gudgeon parts but if I find them I’ll edit the post and add them

Putting carbon fiber on gudgeons

2720

Gluing to rudder web

2726

Completed rudder web w/ bob-stay eye to right

2759

Making molds for beam mount flanges.  They’re clamped to beam mounts to help hold proper shape

2783

Laminated forward beam mount flanges

2807

Molds taken off forward beam mount flanges

2816

2819

Cleaned them up some to a rough-shape

2822

2825

Laminating flanges for aft beam mounts

2807

Making large foam blank for daggerboard

2844

Adding some of the extra laminate on the keel

2841

2847

2850

And finally….  some frames seem to have gone missing late at night on the 31st….  could something be in store for New Years???

2831